A DIY Guide to Mobile Home Skirting Installation

Mobile home skirting is an integral part of any mobile home. It helps to protect your new investment against the elements. It also keeps unwelcome pests and creatures from establishing camp beneath your home, which could cause considerable damage and possibly spread illness. Skirting is also beneficial to the structural aspects of a mobile home, such as the roof, structural sides and roof vents, ductwork and plumbing located below the house. Learn more about concrete wheel stops. All of this adds up to a very high quality shelter that is both comfortable and safe for you and your family.

Before undertaking a mobile home skirting installation, there are several important things to consider. First and foremost, you must make sure the area under the house is completely level. If there is a dip or slope, it will be impossible to install the new skirting without some sort of modification. The best way to level the area is to use a professional grade hydrostatic pressure line and then do a little leveling on your own using steel wool or other absorbent materials.

In most cases, there will be either a minimum or a maximum height requirement for the skirting material you choose to use. The minimum height is typically six feet, but you can set it higher if necessary. Some of the newer mobile homes have a top front rail installed but not all do. If you choose to use the top front rail as a guideline for your new mobile home skirting installation, be sure to check the manufacturer's specifications for the minimum and maximum heights. You don't want to go with a height that is too short, or you will risk injuring someone if they get close to the top front rail or getting struck by one of the limbs of the new skirting. Remember that this is an important safety consideration, and not something you should take lightly.

The next step in your mobile home skirting installation is to purchase the necessary tools. You will need a tape measure, a pencil, and hammer. If you are going to use tin snips during your mobile home skirting installation, make sure you have them in a safe place. Also, having the right tool can make your job easier.

When you purchase your tools, you will also need to purchase the appropriate vinyl sheets and possibly an electrician's kit. Get more info about mobile home skirting installation. The first thing you want to do before you begin your mobile home skirting installation is to prepare the area by removing all loose or broken debris from the walls. Once you have the walls ready, you can begin to outline your new skirting panels. To help you decide how many panels to buy or customize, take a look at the manufacturer's specifications on the product packaging or get some ideas from others who may have already used these panels.

Your next step in your mobile home skirting installation is to cut the sections of vinyl you are going to use. You will need to be sure that you have the right size panels so that the manufacturer's dimensions are properly marked. Use the appropriate stud finder in order to ensure that you are placing the sections correctly. Make sure you nail all of your panels together tightly to keep moisture from building up between the seams of the skirting material. Now it is time to paint the entire exterior of your new skirting material to match the color of the manufactured home skirting. Learn more from https://www.dictionary.com/browse/baseboard.

All Posts

Almost done…

We just sent you an email. Please click the link in the email to confirm your subscription!

OKSubscriptions powered by Strikingly